TheHaflinger.com

Garry , I know what you mean ,you will have a few more days like this by the time you have finished.
regards Dave

Hi Garry, There are 2 plates , 1 each side of the bottom of the steering column ,if memory serves me right , I think there are 3 securing bolts on each plate, remove the plates , you can now access the nut at the end of the clutch cable , the cable can now be unhooked at the engine end and then slid...

I visited the owner of the Haflinger mentioned in the Rebuild post , this is the one up on chain blocks ,apparently his son ripped the swinging arm off a few years ago and they have not got round to repairing it yet. While I was there I was told about another Haflinger about 5 Kms away so I took the...

Hi Sam, sorry but I dont know how the process is done,they were on the Haf when I purchased it.
regards Dave

Hi Garry. the metal collar has 3 little buttons ,1 on each side,press these in then the collar will prise up.
regards dave

Hi Sam & Rick, thank you for the compliments, Sam the tyres are semprit which have been retreaded and they are on original rims, Rick yes it has been a hard slog but an enjoyable one ,I have had the Haf for about 4 years now , I have to fill and bleed the brakes and adjust the hand brake plus a ...

Hi, If any one in Australia who has access to a LWB type canvas top with 4 Doors as a template, please let me know as I will need one at some stage of my rebuild .I also need measurements & sizes for the canvas bows as well. Rick is the offer still on to lend me the door frames when I require th...

Hi , I have just had these Tail boards made , I picked them up today ,I am waiting for the short side boards to be completed then I will add a photo of them as well.
Dave

Body meets Chassis in my new shed.
Dave.

Moving the chassis from the front garage to my new shed.
Dave.

Hi , Here are the new seat pads I had made about 2 months ago.
Dave.

I have spoken to Dale at Haflinger Tecknik and he has checked one of his Haflingers and the wire connects to the small rectangular relay , terminal marked 30/51. between the starter solenoid and fuel filter .
Dave.

Hi, as stated in my first post I am rebuilding a Lwb haffy , I have made a new wiring harness as the old one was in a bad state of repair, I have taken lots of photos of the rebuild ,including the engine bay wiring harness . the vehicle has a suppression type harness and parts as shown on page 9.10/...

Hi , my name is Dave Ogden and I live in Cairns Australia, I am 3/4 way through rebuilding a 1968 LWB Haflinger,